INSTALLATION
RECOMMENDED INSTALLATION TECHNIQUES FOR BLUESTONE
Please use one of the following adhesives IF installing in the adhesive is preferred…..
If you prefer to install your pavers in traditional sand and cement style follow these instructions to the letter:
ARDEX | CONSTRUCTION CHEMICALS | MAPEI
– Select one of the adhesives above (ALL are rapid setting adhesives) and simply mix as per manufactures specifications then 10mm notch the adhesive onto the back of EVERY tile (ensuring 100% coverage).
– Let the adhesive set( the ones above set rapidly), usually around 3-4 hrs and then install the tiles as per your usual technique into the wet sand and cement mix. IF you don’t use a rapid setting adhesive you must allow a minimum of 12 hrs before laying into the wet mix of sand and cement.
– This system minimises the risk of any of the tiles warping slightly due to being moisture sensitive or being excessively hot at time of installation.
– IF installing in sand and cement we recommend adding F-LOC to the mixture, this will reduce the chance of any efflorescence (calcium hydroxide) migrating
to the surface of the grout or tile. Tech Specs www.efflock.com.au.This can be purchased from Bunnings
– GROUTING should ONLY occur IF the tiles have been completely dry for at least 4 days in a row.
– IT IS NOT acceptable to blow the water out of the joints and then grout as you WILL have effluence issues, possibly warping issues, picture framing due to trapped excessive moisture.
– You must of course follow the Australian Tiling Standards in regard to incorporating expansion joints into your tiling. Failure to do so WILL lead to drummy and lifting tiles.
Bluestone can be sealed with an invisible penetrating sealer to assist in the ongoing clean up of the stone.
An invisible penetrating sealer can be applied prior to grouting which will facilitate easy clean up after application of the grout.
Cleaning:
Do not use Hydrochloric acid for clean up as this can cause minerals present in the stone to react. Bluestone responds well to high pressure cleaning with a domestic machine, please keep the nozzle about 300mm minimum away from face of the bluestone pavers and tiles. Please ensure you use a blade not pin type head on the pressure cleaner, and ensure you pressure wash the ENTIRE paver.
Maintenance:
Just sweep when needed. Bluestone responds well to high pressure cleaning. Bluestone responds well to high pressure cleaning with a domestic machine, please keep the nozzle about 300mm minimum away from face of the bluestone pavers and tiles. Please ensure you use a blade not pin type head on the pressure cleaner, and ensure you pressure wash the ENTIRE paver. A solution of mild detergent and water, can be applied prior to pressure cleaning.
We deliver bluestone pavers, tiles and pool coping door to door to all suburbs in Melbourne, Sydney, Canberra, Brisbane, Adelaide and Hobart. We also deliver to any regional area in Australia at reasonable freight rates.
STANDARD V PREMIUM GRADE
RECOMMENDED INSTALLATION TECHNIQUES FOR BLUESTONE
Please use one of the following adhesives IF installing in the adhesive is preferred…..
If you prefer to install your pavers in traditional sand and cement style follow these instructions to the letter:
ARDEX | CONSTRUCTION CHEMICALS | MAPEI
– Select one of the adhesives above (ALL are rapid setting adhesives) and simply mix as per manufactures specifications then 10mm notch the adhesive onto the back of EVERY tile (ensuring 100% coverage).
– Let the adhesive set( the ones above set rapidly), usually around 3-4 hrs and then install the tiles as per your usual technique into the wet sand and cement mix. IF you don’t use a rapid setting adhesive you must allow a minimum of 12 hrs before laying into the wet mix of sand and cement.
– This system minimises the risk of any of the tiles warping slightly due to being moisture sensitive or being excessively hot at time of installation.
– IF installing in sand and cement we recommend adding F-LOC to the mixture, this will reduce the chance of any efflorescence (calcium hydroxide) migrating
to the surface of the grout or tile. Tech Specs www.efflock.com.au.This can be purchased from Bunnings
– GROUTING should ONLY occur IF the tiles have been completely dry for at least 4 days in a row.
– IT IS NOT acceptable to blow the water out of the joints and then grout as you WILL have effluence issues, possibly warping issues, picture framing due to trapped excessive moisture.
– You must of course follow the Australian Tiling Standards in regard to incorporating expansion joints into your tiling. Failure to do so WILL lead to drummy and lifting tiles.
Bluestone can be sealed with an invisible penetrating sealer to assist in the ongoing clean up of the stone.
An invisible penetrating sealer can be applied prior to grouting which will facilitate easy clean up after application of the grout.
Cleaning:
Do not use Hydrochloric acid for clean up as this can cause minerals present in the stone to react. Bluestone responds well to high pressure cleaning with a domestic machine, please keep the nozzle about 300mm minimum away from face of the bluestone pavers and tiles. Please ensure you use a blade not pin type head on the pressure cleaner, and ensure you pressure wash the ENTIRE paver.
Maintenance:
Just sweep when needed. Bluestone responds well to high pressure cleaning. Bluestone responds well to high pressure cleaning with a domestic machine, please keep the nozzle about 300mm minimum away from face of the bluestone pavers and tiles. Please ensure you use a blade not pin type head on the pressure cleaner, and ensure you pressure wash the ENTIRE paver. A solution of mild detergent and water, can be applied prior to pressure cleaning.
We deliver bluestone pavers, tiles and pool coping door to door to all suburbs in Melbourne, Sydney, Canberra, Brisbane, Adelaide and Hobart. We also deliver to any regional area in Australia at reasonable freight rates.